THE BPD Blog

From blogs to case studies to news, we love sharing our tips and tricks for asset management, cloud, IoT and smarter operations.

by | May 4, 2021

BPD Zenith’s Asset Health Monitoring Solution, LoveYourAsset

Throughout the history of mankind, technology has always played a great role in facilitating our lives and simplifying critical challenges for progress in every field, particularly in the area of Asset Management where we are seeing many companies investing in a good Asset Health Monitoring Solution. For good reason too! As the years have progressed and as technology has evolved, we have become more and more dependent on it every day. However, it is important to note that every era of technology has been shapeshifted by some type or revolution.

With Industry 4.0 in effect, the stage is now set for micro to macro level innovations and ideas. Vast opportunities for innovations are in front of us – it is just a matter of efficiently combining the available resources and technology to achieve uniqueness.

The evolution of technology

The journey of industrial revolution started from transformation of natural energy resources like coal to efficient consumption with the help of technology, which resulted in the invention of the steam engine. Then came electricity, gas, and oil with advancements in communication systems like telegraph and telephone till the end of the 20th century.

In the second half of the 20th century, a boost in the course of computers, electronics i.e. Programmable Logic Controllers (PLCs) and telecommunications was seen. Robots helped give rise to an era of high-level automation with parallel advancements in the fields like space, research, and biotechnology.

Now, let us consider 4.0 technologies. AI, IOT, Robotics, virtual reality and digital twin can be seen to add an immense rise in the industry.

The combination of Internet of Things (IoT) and Artificial Intelligence (AI) has the potential to dramatically accelerate the benefits of digital transformation and data exchange for consumer, enterprise, industrial, and government market segments.

How has BPD Zenith contributed to the development of Industry 4.0?

BPD Zenith had the opportunity to work on developing a Proof of Concept (POC) for an Asset Health Monitoring system. The concept was to integrate real time data acquisition with centralized data analytics and processing to achieve a system which can deliver asset health monitoring. Each asset talks to the centralized system with no human interference making the POC an IOT capable system.

This can be achieved by developing application specific sensors, acting as real time data acquisition parts. These sensors must be capable of long-range communication with the centralized Asset Health Monitoring system. BPD’s LoveYourAsset (LYA) with MaxiCloud integration acted as the Centralized Asset Health Monitoring system while application specific sensors were developed to enhance the system capabilities for device-to-device communication.

Introducing BPD Zenith’s Asset Health Monitoring Solution, LoveYourAsset

Our sensor packs have been created to monitor Asset health by identifying and reporting all variances in elements such as temperature, humidity, and light in the operating vicinity. First, this data is communicated from the sensor to an MQTT server which is linked with node red application for data filtering and mapping with the MaxiCloud integration application. Then, this data is analyzed by MaxiCloud with provided upper and lower level boundaries with the help of data analytics and calculations.

At the user end, device health can be visualized with different asset meters and notifications. If the asset health is critical or a peculiar change had been identified, it can be communicated to the client by the help of LYA dashboards. Additionally, GSM mobile notification can be setup to update the user immediately. The location of the asset can be pinpointed by visualizing the dashboards and multiple assets can be monitored simultaneously.

~ LYA Dashboard ~

~ LYA Dashboard ~

A high-level system overview can be seen below:

~ LoveYourAsset solution ~

Below, is a photo of the BPD developed sensor. We designed the sensor top to be translucent to allow for the sensors to perform properly and at the same time, enable the user to monitor the performance and operational indicators.

~ Sensor~

The sensor can be easily setup by connecting to a Wi-Fi network and logging into the LYA dashboard. Now you have everything you need to monitor your asset health by analyzing meter readings and different graphs!

Why should you invest in an Asset Health Monitoring Solution?

Let’s look into a simple industrial example of vehicle assembly plant.

There are multiple stages for a vehicle to be assembled and each stage is dependent on the previous one. Some stages involve robots and machinery while others involve different tools and equipment.

At the back-end there is a component inventory with all the screws and nuts etc. required for assembly.

During the whole assembly process, if one stage fails to deliver, the dependent stages will halt and the entire assembly plant will be out of production for some time which, cause huge amounts of losses to the assembly plant.

Now, consider the same scenario with asset health monitoring sensors installed for different machinery, tools and inventory. The chances of failure can be dramatically reduced.

  • If the temperature of a specific machinery is going beyond the critical limit, the asset health monitoring system can flag a warning by predicting and identifying the equipment.
  • If inventory stock is low, the sensors can identify and place orders for new assembly components before the stock runs out.
  • If the machinery vibration is beyond the critical measures, warnings can be raised and communicated to the maintenance department.

Our system is unique and effective due to a monitoring rate of every second or a couple of seconds, enabling real time asset health monitoring for a respective asset.

If you’d like to learn more about our LoveYourAsset solution or have any questions regarding the contents of this blog, please contact us.

Ehtisham Nasir

Ehtisham Nasir

Ehtisham is an Electrical and Computer Engineer, working as a Graduate Maximo Consultant at BPD Zenith APAC. Ehtisham has worked on our Asset Health Monitoring System and integration with Maximo where he developed real time data acquisition and data processing systems and sensors. Ehtisham has also specialized in circuit design and firmware development for embedded systems with research and development in IoT. Outside the office, he enjoys learning about and exploring new technologies in the field of IoT. He also enjoys playing strategic games, watching movies, swimming and horse riding.

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

9 Recommendations For A Successful SAP & IBM Maximo EAM Interface

9 Recommendations For A Successful SAP & IBM Maximo EAM Interface

Integration is often a key component for getting the most out of your critical IT applications. Modern Enterprise Asset Management systems such as IBM Maximo are designed for integration which can expand their capabilities and allow the flexibility that the industry...

Reinvent the Wheel with BPD Zenith’s Maximo Accelerators

Reinvent the Wheel with BPD Zenith’s Maximo Accelerators

I was recently involved in preparing a business case for a Maximo implementation, and as a part of process I spent considerable time analyzing and evaluating the best approach. In essence, I was trying to find the optimum balance between minimizing the length of the...

Defence Seaworthiness – A session from AMPEAK 2021

Defence Seaworthiness – A session from AMPEAK 2021

I recently got the opportunity to attend Asset Management Council of Australia’s AMPEAK conference. It has been a great experience interacting directly with the true practitioners of Asset Management, and understanding some of the technology challenges that they are...

How to call a Report directly from the Action Menu in IBM Maximo

How to call a Report directly from the Action Menu in IBM Maximo

In IBM Maximo, it’s possible to add a direct print option to a report. This adds a printer icon to the toolbar and allows you to run the report with just one click. But for reports where there are parameters required before running, this is not possible… Usually, a user will have to click the “Run Reports” action, then find their report in the list of all reports available for that application. They then click on the one they want before being taken to the IBM Maximo Reports Request page. In this blog I’ll show you how to get around that problem. in our example we use an Action launch point for an Automation Script and link it to a menu item in IBM Maximo Application Designer…

Sign up to our free newsletter to explore emerging technologies, industry events and Maximo best practice.

Come with BPD Zenith to the future of Asset Management

Listen to your assets!

Most companies are aware of waste in their preventative maintenance efforts, but aren’t quite sure how to eliminate it.